Peavey ICA 400V, ICA Series, ICA 600, ICA 800V, ICA 1200 manual ICA 2400V Specifications

Models: ICA 2400 ICA 2400V ICA 400V ICA 800V ICA Series ICA 1200 ICA 600

1 64
Download 64 pages 6.64 Kb
Page 60
Image 60

ICA2400V SPECIFICATIONS

Rated Power (2 x 4 ohms):

1200 watts @ 20 Hz - 20 kHz both channels driven at < 0.1% THD

Rated Power (2 x 8 ohms):

800 watts @ 20 Hz – 20 kHz both channels driven at < 0.08% THD

Rated Power (1 x 4 ohms):

1325 watts @ 1 kHz at < 0.08% THD

Rated Power (1 x 8 ohms):

830 watts @ 1 kHz at < 0.08% THD

Topology:

Class H

Minimum Load Impedance:

4 ohms

Maximum RMS Voltage Swing: 95 volts

Frequency Response:

10 Hz – 25 kHz; +0, -.3 dB at 1 watt

Power Bandwidth:

10 Hz – 50 kHz; +0, -3 dB at rated power

THD (2 x 4 ohms):

<0.025% @ 1200 W @ 1 kHz with both channels driven

THD (2 x 8 ohms):

<0.008% @ 800 W @ 1 kHz with both channels driven

THD (1 x 4 ohms): <0.015% @ 1325 W @ 1kHz

THD (1 x 8 ohms): <0.006% @ 830 W @ 1kHz

SMPTE IMD:

<0.1% 60 Hz and 7 kHz, 800 W @ 8 ohms

Slew Rate:

35 V/us

Damping Factor (8 ohms):

>250:1 @ 20 Hz – 1 kHz

Input CMRR:

> 65 dB @ 1 kHz

Voltage Gain:

x 40 (32 dB)

Input Sensitivity:

1.73volts @ 4 ohms, 2 volts @ 8 ohms

Input Impedance:

20 k ohms, balanced

Hum and Noise:

>-115 dB, “A” weighted referenced to rated power @ 8 ohms

Crosstalk:

>-55 dB, “A” weighted referenced to rated power @ 8 ohms

Current Draw @ 1/8 power:

575 watts @ 4 ohms, 380 watts @

8 ohms

Current Draw @ 1/3 power:

1185 watts @ 4 ohms, 860 watts @

8 ohms

Idle Current Draw:

35 VA in Standby Mode

Maximum Current Draw:

2,760 VA (time limited by breaker)

Thermal Emissions (BTU/hr.): 940 @ 1/8 power 4 ohms, 615 @ 1/8 power 8 ohms, 1830 @ 1/3 power 4 ohms, 1335 @ 1/3 power @ 8 ohms

Cooling:

120 mm DC fan, off until heatsinks reach 45° C, then variable speed

Controls:

2 rear panel attenuators, sequential turn-on / off

Indicator LEDs:

2 Clip, 2 Signal, 2 LFC, 1 Protect,

1 Power

Protection:

Temp., DC, turn-on bursts, subsonic, incorrect load or short

Connectors:

8-pin plugable signal input, 4-pin plugable sequential power, 4-terminal barrier strip, IEC AC power connector

Construction:

All steel; 16 ga. chassis, 18 ga. top, 12 ga. rack ears

Dimensions:

5.25" x 19" x 16.4"

133 mm x 483 mm x 416.6 mm,

Gross Weight:

51.4 lbs. (23.3 kg.)

Net Weight:

45 lbs. (20.4 kg.)

Due to our efforts for constant improvements, features and specifications are subject to change without notice.

60

Page 60
Image 60
Peavey ICA 400V, ICA Series, ICA 600, ICA 800V, ICA 1200 manual ICA 2400V Specifications