Peavey ICA 800V, ICA Series, ICA 600, ICA 2400, ICA 400V, ICA 1200 Input Cmrr Rated Power one channel

ICA™ 2400V SPECIFICATIONS

Rated Power (two channels):	Damping Factor:	Cooling:
1200 watts @ 20 Hz to 20 kHz both	>250:1 @ 20 Hz – 1 kHz	120 mm DC fan, off until heatsinks
channels driven at < 0.1% THD		reach 45° C, then variable speed
	Input CMRR:
Rated Power (one channel):	>65 dB @ 1 kHz	Controls:
Awaiting test results		2 rear panel attenuators, sequential
	Voltage Gain:	turn-on /-off:
Topology:	x 40 (32 dB)
Class H		Indicator LEDs :
	Input Sensitivity:	2 Clip, 2 Signal, 2 LFC, 1 Protect,
Minimum Load Impedance:	1.77 volts	1 Power
@ 70.7 volts
6.3 ohms	Input Impedance:	Protection:
	20 k ohms, balanced	Temp., DC, turn-on bursts, subsonic,
Maximum RMS Voltage Swing:		incorrect load or short
95 volts	Hum and Noise:
	>-115 dB, “A” weighted referenced to	Connectors:
Frequency Response:	rated power	8-pin plugable signal input, 4-pin
10 Hz – 25 kHz; +0, -.3 dB at 1 watt		plugable sequential power, 4-terminal
	Crosstalk:	barrier strip, IEC AC power connector
Power Bandwidth:	> -55 dB, “A” weighted referenced to
10 Hz – 50 kHz; +0, -3 dB at rated	rated power	Construction:
power		All steel; 16 ga. chassis, 18 ga. top,
	Current Draw @ 1/8 power:	12 ga. rack ears
THD (two channels driven):	497 watts
<0.008% @ 800 W @ 1 kHz with both		Dimensions:
channels driven	Current Draw @ 1/3 power:	5.23" x 19" x 16.4"
	1037 watts	133 mm x 483 mm x 416mm
THD (one channel driven):
<0.006% @ 830 W @ 1 kHz	Idle Current Draw:	Gross Weight:
	35 VA in Standby Mode	51.4 lbs. (23.3 kg.)
SMPTE IMD:
<0.1% 60 Hz and 7 kHz, 800 W @	Maximum Current Draw:	Net Weight:
8 ohms	2,760 VA (time limited by breaker)	45 lbs. (20.4 kg.)
Slew Rate:	Thermal Emissions (BTU/hr.):
35 V/us	940 @ 1/8 power,
	1,830 @ 1/3 power

Due to our efforts for constant improvements, features and specifications are subject to change without notice.

45