Peavey ICA Series, ICA 600, ICA 800V, ICA 400V, ICA 2400V, ICA 1200 manual ICA 2400 Specifications

ICA™ 2400 SPECIFICATIONS

Rated Power (2 x 4 ohms):

1200 watts @ 20 Hz - 20 kHz both channels driven at < 0.1% THD

Rated Power (2 x 8 ohms):

800 watts @ 20 Hz – 20 kHz both channels driven at < 0.08% THD

Rated Power (1 x 4 ohms):

1325 watts @ 1 kHz at < 0.08% THD

Rated Power (1 x 8 ohms):

830 watts @ 1 kHz at < 0.08% THD

Topology:

Class H

Minimum Load Impedance: 4 ohms

Maximum RMS Voltage Swing:

95 volts

Frequency Response:

10 Hz – 25 kHz; +0, -.3 dB at 1 watt

Power Bandwidth:

10 Hz – 50 kHz; +0, -3 dB at rated power

THD (2 x 4 ohms):

<0.025% @ 1200 W @ 1 kHz with both channels driven

THD (2 x 8 ohms):

<0.008% @ 800 W @ 1 kHz with both channels driven

THD (1 x 4 ohms): <0.015% @ 1325 W @ 1kHz

THD (1 x 8 ohms): <0.006% @ 830 W @ 1kHz

SMPTE IMD:

<0.1% 60 Hz and 7 kHz, 800 W @ 8 ohms

Slew Rate:

35 V/us

Damping Factor (8 ohms):

>250:1 @ 20 Hz – 1 kHz

Input CMRR:

> 65 dB @ 1 kHz

Voltage Gain:

x 40 (32 dB)

Input Sensitivity:

1.73volts @ 4 ohms, 2 volts @ 8 ohms

Input Impedance:

20 k ohms, balanced

Hum and Noise:

>-115 dB, “A” weighted referenced to rated power @ 8 ohms

Crosstalk:

>-55 dB, “A” weighted referenced to rated power @ 8 ohms

Current Draw @ 1/8 power:

575 watts @ 4 ohms, 380 watts @

8 ohms

Current Draw @ 1/3 power:

1185 watts @ 4 ohms, 860 watts @

8 ohms

Idle Current Draw:

35 VA in Standby Mode

Maximum Current Draw:

2,760 VA (time limited by breaker)

Thermal Emissions (BTU/hr.): 940 @ 1/8 power 4 ohms, 615 @ 1/8 power 8 ohms, 1830 @ 1/3 power 4 ohms, 1335 @ 1/3 power @ 8 ohms

Cooling:

120 mm DC fan, off until heatsinks reach 45° C, then variable speed

Controls:

2 rear panel attenuators, sequential turn-on / off

Indicator LEDs:

2 Clip, 2 Signal, 2 LFC, 1 Protect,

1 Power

Protection:

Temp., DC, turn-on bursts, subsonic, incorrect load or short

Connectors:

8-pin plugable signal input, 4-pin plugable sequential power, 4-terminal barrier strip, IEC AC power connector

Construction:

All steel; 16 ga. chassis, 18 ga. top, 12 ga. rack ears

Dimensions: 5.25" x 19" x 16.4"

133 mm x 483 mm x 416.6 mm,

Gross Weight: 51.4 lbs. (23.3 kg.)

Net Weight:

45 lbs. (20.4 kg.)

Due to our efforts for constant improvements, features and specifications are subject to change without notice.

14