Peavey pRP 6 owner manual Transpose, To raise the pitch of the instrument

Models: pRP 6

1 34
Download 34 pages 15.35 Kb
Page 12
Image 12

Transpose

The TRANSPOSE function allows you to quickly change the overall pitch of the instrument, raising or lowering it in steps of one semitone at a time (max. +/– 12 semitones). The transposition applied remains in memory until changed again, or until the instrument is turned off. Turning pRP6 on again restores the normal pitch (C = C).

1.Hold down the TRANSPOSE function key, (C7), then press either the DATA m button or the DATA n button.

Pressing either button, the instrument automatically plays a reference note C in the current pitch (note C).

To raise the pitch of the instrument

2.If you press the DATA m button a second time, the pitch will be raised by one semitone.

The note played in this case will be C#. The pRP6 will now be transposed to the new pitch (C = C#).

Pressing DATA m again will raise the pitch by another semitone (C=D) and so on. Continue in this way until you obtain the required pitch.

To lower the pitch of the instrument

3.Hold down the TRANSPOSE function key (C7) and press the DATA n button once.

The instrument will play a note in the current pitch set in step 2 (in this case D) which will correspond to the reference note.

Press the DATA n button again and the pitch will be lowered by one semitone. The note played in this case will be Db (C = Db).

Press DATA n once more to lower the pitch by another semitone (C = C) so on. Continue in this way until you obtain the required pitch.

Repeat the operations, always with C7 pressed, until you obtain the required transposition either above or below standard pitch.

To escape from the TRANSPOSE menu, simply release the corre- sponding function key C7.

The instrument will remain set at the new pitch until you change the setting, or turn the instrument off. When you turn the instrument on again, the Transpose setting will set automatically to the normal pitch.

To cancel the transposition (without turning off)

4.Hold down the TRANSPOSE function key (C7) and press both the DATA m and n buttons at the same time.

The normal pitch of the instrument will be restored (C=C), confirmed by the reference note which will play the note C.

8

Page 12
Image 12
Peavey pRP 6 owner manual Transpose, To raise the pitch of the instrument, To lower the pitch of the instrument