Peavey RQ 4300 Series Equivalent Input Noise EIN, Crosstalk, Meters, Signal / Overload Indicators

Hum and Noise:

Output	Residual Noise	S/N Ratio	Test Conditions
	Ref: 0 dBu
Master L/R	-105 dBu	109 dB	All Faders Down
Mono
	-90 dBu	94 dB	Master Fader Nominal,
			Channel Faders Down,
			All Channels Assigned
Submaster	-98 dBu	102 dB	All Faders Down
	-88 dBu	92 dB	Submaster Fader
			Nominal, Channel
			Faders Down,
			All Channels Assigned

(Hum and Noise Measurements: 22 Hz to 22 KHz BW)

Equivalent Input Noise (EIN):

-128 dBu (Input terminated with 150 Ohms)

Crosstalk:

>90 dB Adjacent Input Channels (20 Hz - 20 kHz) >70 dB Left to Right Outputs (20 Hz - 20 kHz)

Common Mode Rejection Ratio (Mic Input): 50 dB min (20 Hz - 20 kHz)

70 dB typ @ 1 kHz

Meters:

L/R Master and all Submasters = 12 segment, peak reading (0 dB= +4 dBu)

Signal / Overload Indicators:

Red LED lights 2 dB below clipping

Lamp Power:

12 VDC @ 350mA per connector, or 12VDC @ 700mA total maximum load

Power Requirements:

DOM: 100 VAC –240 VAC 50/60 Hz 70 Watts Nominal, 24 chan 80 Watts Nominal, 32 chan

Dimensions:

RQ™ 4324		RQ™ 4332
Height:	8.9" (226 mm)	Height:	8.9" (226 mm)
Width:	36.6" (930 mm)	Width:	44.6"	(1132 mm)
Depth:	19.5" (495 mm)	Depth:	19.5"	(495 mm)
Weight:	36 lbs. (16.4 kg)	Weight:	48 lbs. (21.8 kg)

19