CENTURY SERIES

SP / TC / GT

Group Assignments

Assigns the group signal to the Left, Right, and or Mono out- puts.

Group XLR

Turns on the balanced XLR output.

Matrix Pre/Post

Switches the Matrix sends between pre and post-fader settings.

Fader Reverse w/LED

Swaps functions between the Effect Level control and the group fader; i.e., one becomes the other and vice versa.

Group PFL

Allows for Pre Fader Listening of the Group signal.

Group Peak & Signal LED’s

The red LED indicates that the group signal is within 3dB of the clipping point.

The green LED constantly displays the level of group signal activity by varying in intensity.

Group Fader

Controls all post-fader group signal outputs.

EFX Return Scene Mute

Assignments

Assign the EFX return signal to any of the four scene mute groups. Scene mute combines with the effect’s local mute but- ton, and actuates the local mute LED.

EFX Return Scene Mute Safe Switch

Disables all selected EFX scene mute assignments. An associ- ated green LED indicates the return is in a safe state.

GROUP OUT

GROUP INSERT

EFX RETURN

-10 +4

BUS IN

Rear Connections

Group Out

This connector carries the post-fader output signal from the associated group module.

Group Insert

This jack allows for the insertion of an effect or signal processor into the audio path of the associated group.

EFX Return

These two connectors allow for effect signals to be brought back into the board. The 1/4" TRS jack accepts a balanced or unbalanced signal at -10 dB level and delivers the signal to the EFX return section. The female XLR connector accepts a balanced signal at +4dB level and delivers the signal to the EFX return section of the group.

Bus In

This connector accepts a balanced signal at +4dB level, and then sums it with all the other signals assigned to the associated groups.

PAGE 19

Page 21
Image 21
Peavey GT, TC owner manual Group XLR, Matrix Pre/Post, Fader Reverse w/LED, EFX Return Scene Mute Assignments, Bus