SP / TC / GT | CENTURY SERIES |
SP/TC/GT USER-OPTIONS
SP, TC, and GT consoles are shipped having standard configuration unless specified at time of order. These are ways that the console configuration may be varied after manufacture. The items listed are internal options selected by gold jumper links.
Default is marked with a line on the board and is usually pins 1&2 of the three pin header.
In addition there are links for module function assignment. Take care to not disturb these when using USER OPTION links.
MODULE | LOCATION | OPTION TITLE |
| M = Main board |
|
| C = Connector |
|
All Inputs | M | Pre Source (SRC)Mute |
| M | Pre Source Select |
Group Outs | M | Matrix Post Mute? Y/N |
Left/Right Outs | M | J8, Aux local Mute |
Monitor Master | C | Talkback XLR +48V |
Optional Modules |
|
|
Matrix Module | M | Cue (PFL switch) |
GT Stereo In | M | Polarity Reverse |
| M | Aux |
| M | Aux |
| M | SEL 1 Pre source L |
| M | SEL 2 Pre source R |
| M | Pre SRC (source) Mute? |
FUNCTION
Shipped with the option underlined Aux sends with or without Mute Pre & Post EQ
Send Group Post Mute Y/N Fit links to enable local mutes On or Off
PFL or AFL L only or L+R
Mono sum Pre or Post Fader Mono sum Pre or Post Fader Pre EQ or Pre Fader
Pre EQ or Pre Fader Yes or No
IMPORTANT
Output modules are
These modules must always be installed in the correct positions. They are NOT interchangeable without being properly re-
assigned. Please contact the Crest Audio Service Department for more information.
APPENDIX A
