CENTURY SERIES

SP / TC / GT

GT Master Section

This master section is the control center for most of the GT’s advanced functions.

Left & Right Meters

Monitors the post-fader output of the Left & Right channels, and any PFL’d signals, via a ten-segment LED array.

Lamp Dim Control

Controls the intensity of the lighting devices plugged into the XLR sockets on the light bar.

Talkback Mic Input

Allows for a gooseneck microphone to be plugged in for use with the talkback system. An additional Talkback Mic Input jack can be found next to the headphone jack on the front-right of the console under the arm rest.

Power Indicators

These four LED’s indicate the status of the four types of power used by Century Series Consoles.

Headphone Jack

Delivers right and left output, unless a PFL switch is depressed. Whenever any signal is in PFL mode, the head- phone jack will deliver that signal. An additional headphone jack is located beneath the hand rest on the right-front part of the console.

Headphone Level Control

Controls the signal level delivered to the headphone jacks.

L, R & Mono Matrix Sends

Controls level of Right, Left and Mono signals sent to the two matrices.

Local Monitor Level Control

Controls level of signal delivered to the monitor outputs.

Auxiliary Mutes

Mutes the respective auxiliary signals.

PFL Defeat

Disables PFL function to the local monitor, allowing local monitor output to function as an additional left/right output.

Dim Switch

This switch introduces a -12 dB attenuation into the local mon- itor and headphone outputs.

Mono Switch

Switches the local monitor and headphone outputs from their standard stereo mode to a mono mode.

Stereo Program In Gain

Adjusts the gain of the Stereo Program In signal.

Stereo Program In EQ

Two-band fixed frequency (10kHz and 80Hz) EQ that affects the Stereo Program In signal.

Stereo Program In Assignments

Assigns the Stereo Program to the associated buses.

Aux Master Controls

Controls final output signal level of the auxiliary outputs.

Aux AFL Switches

Switch the eight auxiliary outputs to After Fader Listening mode, via normal PFL signal path. AUXes can be monitored as stereo pairs if both AFL switches are depressed. If only one is depressed, that AUX is monitored in mono.

External Oscillator Switch

Turns on the internal oscillator or accepts signal from the1/4" TRS Oscillator input jack.

External Talkback Input Switch

Selects the external talkback input XLR as an input signal to the talkback section and overrides the Oscillator.

Stereo Program Balance

Adjusts balance of stereo signal from Stereo Program input.

Stereo Program Level

Controls final output signal level of the Stereo Program.

Talkback Level Control

Controls the level of the selected talkback source.

External Talkback Output Switch

Turns on the external talkback XLR.

Stereo Program Mute

Mutes the output of the stereo program.

Stereo Program PFL

Allows Pre Fader Listening of the Stereo Program signal.

Talkback Assignment Switches

Assigns talkback signal to outputs, groups, auxes, or matrices.

Blend Level

Controls level of L & R signal blended to assigned auxes.

Blend Assignment Switches

Assigns the Left and Right signals to the respective auxes.

Talkback On/Off Switch

Turns the talkback system on and off, and dims local monitor, whether or not Dim switch has been pushed.

Matrix Master Levels (A&B)

Controls the final output level of the respective matrix.

Matrix Master Mutes (A&B)

Mutes the respective matrix signal.

Matrix Master PFL (A&B)

Allows Pre-Fader Listening of the respective matrix signal.

Scene Mute Master Switches

Turn on and off the four scene mutes.

Aux Scene Mute On/Off Switch

Turns the Aux Scene Mute system on and off.

L/R/Mono Mute Switches

Mute outputs of Left, Right and Mono signals respectively.

Local Monitor Mute

Mutes the local monitor signal output.

(Continued)

PAGE 25

Page 27
Image 27
Peavey TC owner manual GT Master Section