Peavey U1002 manual Installation Of The Receiver

3. INSTALLATION OF THE RECEIVER

(1)Install the two antennas to the antenna sockets (4) on the rear panel, illustrated in Fig. 3 or on front rack-mount ears (1). Caution: These sockets have 8 Volts DC supplied to them, which enables you to directly connect the Peavey antenna booster for antenna runs longer than 30' (9.144m). At that point it is recommended that you install an optional antenna booster to make up for signal loss through the cable and ensure the sensitivity of the reception.

(2)Connecting the power supply: Connect the AC/DC adapter cable to the 12VDC Input Jack (10) illustrated in Fig. 3. Next, plug the adapter unit into an appropriate AC outlet with caution to the correct voltage for both AC outlet and adapter as marked.

(3)Audio Output Connections:

11