System Requirements:
•Windows 98R, Windows 2000R
•32MB RAM Minimum (64MB is recommended)
•
•At Least one
8. CAUTIONS
(1)When using the DC power supply, please be aware of the operating voltage. Make sure that a minimum of 12 Volts can be obtained in order for the receiver to function properly. However, the supply voltage should never exceed 15 Volts DC, or the receiver could suffer severe internal damage. It is recommended that the DC power source be rated at least 1 Amp.
(2)To ensure maximum sensitivity, use only the proper antennas designed for Peavey receivers.
(3)Antenna sockets have 8VDC supplied to them for the operation of boosters if necessary. DO NOT SHORT the antenna connector. Make ALL connections to the receiver before powering up.
25
