7. COMPUTER NETWORK INTERFACE OPERATION
(1)Connect the network interface remote connector (8) on the back of the receiver to the interface converter (this requires at least two linking cables for each pairing). Then use RJ 11 telephone cable to connect the converter to the
(2)When linking more than one unit, attach one end of the additional cable to the remote "OUT" jack (8) on the back of the first receiver and connect the other end of the cable to the remote "IN" jack on the back of the second receiver as illustrated in Fig. 10. Continue these parallel connections until all receivers are linked to the first receiver.
(3)This interface system adapts parallel connections. Therefore, it only takes two linking cables to address the first receiver and one additional cable for each receiver after that.
(4)The longer the distance to the converter, the worse the system stability may be. The network system can work up to with up to 984' (300m) of linking wire. However, it is our recommendation to keep this cable under 328' (100m) to ensure high speed transmission.
24
