Viewing Channel FREQUENGY:
Press the "MENU" button until the "FREQ" function is selected. This will be indicated by a block that will appear around the selected function located in the upper right corner of the display. The frequency displayed will be for that particular channel for that particular group. Press the "MENU" button to escape the function.
(c)SQ: Indicates or selects the SQUELCH level: Squelch is a control that will not allow the audio signal to turn on before the RF signal reaches a certain strength. Too low of a squelch level will allow a noisy audio signal to pass. Too high of a level will cause the audio signal to become choppy and intermittent. The Squelch level is adjustable from 01 - 99. The higher the value, the lower the sensitivity.
18
