Rear Panel:
(4)Rear Antenna Input Connectors (A/B): Installed with antenna directly. This connector also provides power for optional antenna booster.
(5)Balanced Audio output Jack: XLR type connector provides a balanced output signal from the receiver to the mixer.
(6)
(7)Unbalanced Audio output Jack: 1/4" Phone jack provides an unbalanced signal from the receiver to the mixer or guitar/bass amplifier.
(8)Computer Network Interface connector: Network socket to connect to a computerized
(9)DC Input socket: For 12 volt DC supply. Please note that the polarity of the center pin in the socket is positive (+),
(10)Rack mount Brackets (OPTIONAL): Allows the installation of the receiver into an EIA 19" standard rack case.
10
