Peavey U1002 manual Selecting/Setting Name

(e)NAME: Indicates or sets up the name of the receiver. This allows you to give a six character identification to the receiver (i.e. user's name, instrument name etc.). This is extremely helpful when in a rack or with other devices.

Selecting/Setting Name:

Press the "MENU" button until the "NAME" function is selected. This will be indicated by a block that will appear around the selected function located in the upper right corner of the display.

Press and hold the "GROUP” ▲ button or the "SCAN" ▼ button. The character in the far left position will start to blink (if the character is a space it will not blink). This will allow you to scroll through letters, numbers and characters +, -, / and space. When the character desired is reached, again press the "MENU" button to proceed to the second position character. Then repeat process until all six are completed. Press the Menu button to save and escape the function.

21