Pelco C541M-C, C538M A Word About The Menu Discussion Layout, Information Box, CM9760-SAT, Figure

A WORD ABOUT THE MENU DISCUSSION LAYOUT

The menu discussion is split into three columns. At the top, far right side of each page, the SAT main menu is displayed and the sub-menu under discussion is highlighted. Tagged, drop-down arrows below that, indicate approximately where, within the sub-menu being programmed, that the referenced sub-menu is discussed. These comments appear in the middle column. The far left column displays a KBD300 template, whose keyboard movements are highlighted, to indicate the keyboard movements necessary to invoke the program operation(s) being discussed in the adjacent columns. These conventions are illustrated below.

Figure 2-5

Menu Discussion Conventions

INFORMATION BOX

Programming SAT menus from the CM9760-KBD.

All columns in the menu discussion layout except the far left one, where keypad movement on a KBD300 is illustrated, are applicable to anyone programming direct from the 9760 keyboard.

The information contained in the sub-sections entitled Programming Con- figuration II and Programming Configuration III, located in SECTION 2, PRELIMINARIES, instructs the 9760-KBD user on the steps to follow in order to arrive at the SAT main programming menu (see the Camera Progamming Menu – Page 1 of 2).

The joystick affects cursor movement and some sub-menu selections. Otherwise, the “Iris” Open/Close button effects item choices. Unlike the KBD300 keypad, you cannot revert to the main menu using a PGM key and you cannot choose a numbered selection by pressing a “numbered” key, nor can you ACK an item: you have no “shortcut” keys. But you can program the menus. Perhaps not as quickly, but you still can get the job done.

JOYSTICK

OPEN/CLOSE IRIS BUTTON

PROGRAMMING AND CONFIGURATION CM9760-SAT 2-5