Pelco C579M, C1501M, C1503M, C549M-A Alarms File, Programming And Configuration, CM9760-SAT, Figure

3.4 ALARMS FILE

In addition to the previous files, it may also be necessary to configure an alarm file if you want to set up the system for head-end alarm notification. Triggered alarms on the SAT SIDE result in a series of events, controlled, in part, by the programming of the ALARM file on the 9760 SIDE of the configuration. Figure 3-9 is an example ALARM file configured for just one alarm. All 16 SAT alarms can be configured if you want. Additional configuration files may have to be edited to set up your system to meet other specific operational needs. Suggestions and additional considerations, as well as alarm operations, are discussed in Section 3, 3.2 9760-SAT Alarm Response. Note Figure 3-18. Each keyboard operator must be assigned alarm monitors on which to view any activated alarms.

Figure 2-9

Alarm File

PROGRAMMING AND CONFIGURATION CM9760-SAT 2-21