3.5 AUXS

There are three AUX outputs available through the control output wiring terminals located on the rear of the SAT. Aux operation and control are for local SAT SIDE use only. Aux ouputs cannot be controlled from the 9760-KBD. These outputs are used to operate external devices. Each output corresponds to a function key (F1-F3) on the KBD200/300/300V keyboard. The outputs can also be programmed to respond automati- cally to alarms. F1 is a Form C relay wired with a common (COM) and a normally open (N.O.) or normally closed (N.C.) contact. The other two outputs (F2 and F3) are open collector transistor drivers that drive TTL circuits or low-current relays. If you use an external relay, make sure that voltage and current requirements are well below maximum ratings. Exceeding specified values can permanently damage the transistors. During programming, configure the auxiliary outputs to agree with the type of equipment you are using. Refer to Section 2, Auxiliaries Programming Menu-Page 1 of 1.

Follow the examples illustrated in Figure 1-10 for wiring up the F1, F2 and F3 relay contacts. The in- structions for wiring the F3 relay are the same as those illustrated for F2, if you substitute pins 8 and 9 for pins 6 and 7. When you fin- ish wiring the auxiliary outputs, plug the wiring connector into the control outputs terminal strip.

Figure 1-10

Aux Connections

3.6 LOCAL KEYPADS

The KBD200/300 may be connected to the local keyboard port on the SAT and used (in conjunction with the local moni- tor) for local SAT operations and program- ming. The KBD300V cannot be used with the local keyboard port as the matrix dis- play is not compatible with the voltages supplied there. Connect the keyboard to the local SAT keyboard port as indicated in Figure 1-11. Additional keyboards may be connected to the SAT unit using the remote keyboard port (see Figure 1 and reference Appendix II for information on wiring the remote port).

Figure 1-11

Wiring the Local Keypad Port

PHYSICAL INSTALLATION

CM9760-SAT 1-5

Page 11 Page 13
Page 12
Image 12
Pelco C578M, C1501M, C1503M, C549M-A, C542M-B, C538M, C541M-C, C573M-D, C544M, C579M, C543M-A, C539M-A, C572M Auxs, Local Keypads
Page 11 Page 13

C578M, C572M, C539M-A, C543M-A, C579M specifications

Pelco, a leader in advanced video surveillance technology, offers a range of high-performance cameras designed to meet the diverse needs of professional security applications. The Pelco C578M, C1501M, C573M-D, C539M-A, and C572M models represent the latest innovations in surveillance technology, combining superior image quality, robustness, and flexibility.

The Pelco C578M is a high-resolution dome camera equipped with advanced features such as digital noise reduction and wide dynamic range, ensuring clear images in varying lighting conditions. Its 4MP image sensor provides exceptional detail, making it ideal for critical environments where clarity is paramount. The C578M supports H.265 compression technology, significantly reducing bandwidth and storage requirements while maintaining superior image quality.

The C1501M model is designed for outdoor environments, featuring an IP66-rated enclosure to withstand harsh weather. This camera comes with a 2MP resolution and a 3.6mm fixed lens, providing a wide field of view. Its built-in infrared capabilities enable night vision, allowing for effective surveillance even in complete darkness, making it an ideal choice for perimeter security.

Next, the C573M-D offers dual functionality with its PTZ capabilities. This camera can pan, tilt, and zoom, allowing for flexible monitoring of large areas. With a 5MP resolution, it captures detailed images that are essential for identifying subjects in diverse scenes. The C573M-D is equipped with analytics features such as motion detection and line crossing, enhancing its capability to react to potential security threats.

The C539M-A is notable for its advanced analytics integration, which enables intelligent video analysis. Featuring a wide-angle lens and 4MP resolution, this camera excels in applications requiring both broad coverage and detailed monitoring. The built-in audio support further enhances situational awareness, making it a versatile tool for comprehensive surveillance.

Lastly, the C572M boasts a compact design without compromising on performance. This camera features a 4MP image sensor and is ideal for discreet installations. Its ability to operate seamlessly with existing security infrastructures via ONVIF compatibility enhances its appeal for system integrators.

In conclusion, Pelco’s C578M, C1501M, C573M-D, C539M-A, and C572M cameras exemplify cutting-edge surveillance technology. Each model offers unique features tailored to different security challenges, ensuring that users can find the right solution for their specific needs without compromising on quality or performance. Whether for indoor or outdoor applications, these cameras represent Pelco’s commitment to providing reliable and effective security solutions.
Top Page Image Contents