Part II - Mux Control from the SAT SIDE
Mux control from the SAT side is enabled by reconfiguring the example system we have been using to that shown in Figure
Figure
SAT SIDE Mux Control
Note the following changes and comments:
1.Mux Main no longer is attached to the MXB on the 9760 SIDE. There are now 8 video inputs to the SAT instead of 7. Mux Main is now the 8th input to the SAT.
2.The data “IN” port on the Genex is wired to the remote keyboard port on the SAT; it is no longer connected to the 9760.
3.Operators on the 9760 can view
4.Any SAT keyboard operator can initiate multiplexer functions by pressing the SHIFT key (the LED lights) and choosing the function display desired. Once initialized, any other operator on the system can effect changes to the multiplexed display. Any changes will be reflected in all local monitors at the same time.
5.If a 9760 operator has called up the SAT Mux input (5008), any display activity on the SAT SIDE will be reflected on the operator’s assigned monitor on the 9760 SIDE of the configuration.
| SECTION 4 |