C1554M-A (4/05) 79
CONTROLLING A CM9760-REL RELAY OUTPUT UNIT
The following control options are available for CM9760-REL relay units:
•Set a point to True.
•Set a point to False.
•Set a point’s value momentarily to True.
•Disable a point.
•Enable a point.
All relay unit controls are available through the Device Control dialog box. In addition, your system administrator can write scripts that set the
state of a relay point. Your system administrator should instruct you in what scripts are available to you and how to run them.
NOTE: To access a relay unit, the Pelco Relay driver must be running. Device icons appear as a hollow outline when the device driver is not
running. If you try to open the Device Control dialog box when the driver is not running, you will get a connection error. Notify your system
administrator if the driver is not running.
OPENING A CM9760-REL RELAY UNIT’S DEVICE CONTROL DIALOG BOX
The Device Control dialog box provides tools for controlling a relay unit. To access the Device Control dialog box, you must belong to, and log in
under, a user group that allows you to access the Device Control dialog box.
Open the Device Control dialog box for a relay unit using one of the following methods:
•Double-click the device icon on a map.
•Double-click the device in the Device List.
•Right-click the device in the Device List and then click Show Control Dialog from the pop-up menu.
Figure 80. Relay Unit Device Icon
Figure 81. CM9760-REL Device Control Dialog Box