Pelco C1561M-A (4/05) manual 10

18 C1561M-A (4/05)
step
10 Define Analog Connections Between Devices
To view analog video from a VMX300(-E) workstation, you must identify the switch path of each analog connection in the VMX300(-E) system.
This includes video sources connected directly to a VMX300(-E) workstation, or video input or output devices (such as a camera or monitor)
connected by coaxial cable to a switching device (such as a switcher or a PelcoNet MPEG Series transmission system); the connection between
the switching device and the VMX300(-E) workstation can be either a direct connection or over the network.
1. Navigate the Object Browser tree to [project name] > Connections.
2. In the right pane, double-click Analog Video Connections. The Analog Video Connections dialog box appears.
3. Click the appropriate Source Device in the left pane, and then double-click the Destination Device in the right pane that you want to
connect the Source Device to. The Destination Device moves to the left pane and is displayed as part of the analog video connection.
Repeat steps until all connections have been set.
4. Click File > Close to close the Analog Video Connections dialog box.
Figure 20. Sample Connections for a System Using a Matrix
Figure 21. Sample Connections for a System Using PelcoNet Transmission Systems
LOBBY MONITOR
LOBBY CAMERAREAR DOCK CAMERA
VMX300 (-E)
BUILDING 1 MATRIX
NETWORK
FRONT DOOR
CAMERA
HALLWAY
CAMERA
FRONT DOOR ENCODER
HALLWAY ENCODER
VMX300 (-E)