44 C1561M-A (4/05)
step
25
How to Shut Down the VMX300(-E) Software

HOW TO SHUT DOWN THE CLIENT

Select File > Exit. The VMX300(-E) client logs you out and shuts down. Note that the monitor screen may appear black for about five seconds, and
then the Windows desktop appears. This is part of the normal shutting down process.

SHUTTING DOWN WHILE IN RUN MODE

1. Right-click the VMX300 icon in the Windows system tray, and then select Exit from the pop-up menu.
2. The shutdown prompt appears.
3. Click Yes. The server shuts down.

SHUTTING DOWN WHILE IN CONFIGURATION MODE ONLY

1. If the server is in Configuration mode only, click File > Exit.
Figure 60. File Menu
2. If the server configuration has not changed, the server shuts down immediately.
If you made any changes to the configuration, the Save Changes prompt appears. Click Yes to save changes.
If any scripts or expressions contain errors, the Script and Expression Verification window appears. Use this window to correct the errors
(refer to Syntax Error Checking in the Scripts section of the VMX300(-E) Server Configuration Manual for instructions), and then click OK.
The Script and Expression Verification window closes and the server shuts down.

HOW TO SHUT DOWN A DEVICE DRIVER

1. Right-click the appropriate device driver icon in the Windows system tray, and then select Exit from the pop-up menu. A confirmation dialog
box appears.
2. Click Yes. The driver shuts down.
NOTE: If the server is in both Run mode and Configuration mode, you must shut it down through Run mode. You cannot shut down the
server from Configuration mode when the server is running. Closing the configuration when the server is in Run mode leaves the server
running.
Figure 59. Run Mode Pop-upMenu
NOTE: If the device driver is running as a service, you can shut it down manually by selecting Start > Settings > Control Panel
Administrative Tools > Services. Right-click the driver, and then click Stop.