C1561M-A (4/05) 31
USER GROUPS
When the system administrator sets up a user account for you, you are assigned to one or more user groups. Each user group provides a set of
privileges to the members of the group. These privileges control which parts of the VMX300(-E) system you have access to and what events you
are notified of. Your system administrator will tell you which user groups you belong to and what privileges you have.
When you log in, if you belong to more than one group, you must select one of the groups you belong to. For the duration of that session, your
privileges are limited to those allowed by the group you selected when you logged in. To exercise the privileges of a different user group, you
must log out and log in again, this time specifying the other user group.

SETTING A DEFAULT USER GROUP

To save yourself the trouble of selecting a user group every time you log in, you can set a user group to log in to by default. Thereafter, the client
will log you in automatically under the default group, providing you are connecting to the same server from the same client as when you set the
default. You can later override the default (refer to the VMX300(-E) Client Operation manual for instructions).
1. In the Select Group Dialog Box select the desired user group from the drop-down box.
Figure 39. Setting a Default User Group
2. Click the “Always log in to this server as this group from this location” check box.
3. Click OK.
LOG-IN NOTES:
•If you are a member of more than one user group, the Select User Group dialog box appears, as illustrated in Figure 35. Select the
desired user group from the drop-down box, and then click OK. If you belong to more than one user group, you should know what
privileges each group has been granted. For more information, refer to the User Groups section in the VMX300(-E) Client Operation
manual.
•If the Workspace Not Found dialog box appears (as illustrated in Figure 36), click Yes to have the system create a default workspace.
•The previous user is not logged out until you have completed logging in. If you cancel out of the login procedure, the previous user
remains logged in.