Pelco dx8100 manual Ups To Dvr Communication And Power Connections

Models: dx8100

1 92
Download 92 pages 55.13 Kb
Page 71
Image 71
UPS TO DVR COMMUNICATION AND POWER CONNECTIONS

Appendix D: Connecting an Uninterruptible Power Supply (UPS)

If uninterrupted operation is desired and the power grid cannot provide adequate uptime, it is highly recommended that each DX8100 Series DVR be connected to a UPS device (not supplied). A UPS device will supply a limited amount of battery backup power in the event of a power failure. Each UPS device should be configured to shut down its corresponding DVR safely during an extended period on battery power.

Only those UPS devices that exhibit the Designed for Microsoft Windows XP logo and are listed on the Windows 2000 Hardware Compatibility List are approved for use with the DX8100 Series DVR.

WARNING: Do not install on the DX8100 any power management software that may come with your UPS device. The DX8100’s operating system includes built-in services designed to communicate with UPS devices that exhibit the Designed for Microsoft Windows XP logo.

The following instructions are meant as a general guide for connecting a UPS device to the DX8100 Series DVR. The example below illustrates the installation of an American Power Conversion UPS. This guide is not intended as a representation of how to install every possible make and model of UPS device. Follow the directions that came with your UPS device to ensure that the installation process is completed properly.

UPS TO DVR COMMUNICATION AND POWER CONNECTIONS

1.Shut down the DX8100. Refer to Shutting Down for instructions.

2.Connect the UPS to the DX8100 using a standard USB cable.

3.Connect the other end of the USB cable to one of the four USB 2.0 ports on the back panel of the DVR.

4.Connect the power cord of the UPS to a standard wall socket.

5.Connect the power cord of the DX8100 to one of the power outlets on the UPS.

6.Turn the UPS device power switch on.

7.Turn the DX8100 power switch on.

 

IN1

IN2

IN3

 

 

IN4

IN5

 

IN6

IN7

IN8

IN9

IN10

IN11

IN12

IN13

IN14

IN15

IN16

OUT1

OUT2

OUT3

 

OUT4

OUT5

OUT6

OUT7

OUT8

OUT9

OUT10

OUT11

OUT12

OUT13

OUT14

OUT15

OUT16

ALARM INPUTS

 

 

RELAY OUTPUTS

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

2 4 5

6 7 8

GND

1

2

2 4 5

6 7

8

GND

 

 

 

 

 

 

 

 

 

 

9

10

11 12 13

14 15 16

 

9

10

11 12 13 14 15

16

 

 

 

 

 

 

 

 

 

 

 

POWER

CONNECTION

UPS

RS-232

Manual background USB CABLE Manual background

POWER

CONNECTION

Figure 94. UPS to DX8100 Connections

C2629M-A (6/07)

71

Page 71
Image 71
Pelco dx8100 manual Ups To Dvr Communication And Power Connections