Additional Warnings
There are important observations and warnings that you should be aware of.
•Read and keep all instructions, including the Important Safety Instruction sheet that was supplied with your DVR.
•When using the networking capabilities of the DX8100, Pelco recommends that each DX8100 Series DVR be connected to a secure, private network. Do not directly connect your DVR to a public network such as the Internet.
•It is recommended that the recorder be connected to an uninterruptible power supply (UPS) capable of supplying 2 A for 120 VAC power systems or 1 A for 230 VAC power systems
CAUTION: The recorder should be installed in an air conditioned room where the temperature is maintained between 50° and 90° F (10° and 35°C) with relative humidity not to exceed 80 percent, noncondensing.
WARNING:
•When using the networking capabilities of the DX8100, you should connect each DX8100 Series DVR to a secure, private network. Do not directly connect your DVR to a public network such as the Internet.
•All operating system files, applications, and utilities necessary to operate the DX8100 have been preinstalled on the unit. Do not install or use any software, including antivirus utilities, other than those installed at the factory.
•Do not install any additional hardware on the DX8100 Series DVR other than those devices listed in the documentation accompanying the unit. Do not remove, replace, or change any existing hardware without first consulting Pelco Product Support or an authorized Pelco service center.
9 |
