CONNECTING ATM/POS HARDWARE
This section describes how to connect ATM/POS devices to the DX8100 server using the
Go to URL http://www.Americanvideoequipment.com/technical_support/vsi_compatibility.htm to verify that your ATM/POS device is listed in the VSI Compatibility table.
This section is organized as follows:
•
•
USING THE VSI-PRO TRIPORT CABLE
Figure 103 illustrates the
Figure 102.
The table below describes the
Table I.
Item | Part |
|
|
| Description | ||
| DB9 (male) | DB9 male connector that interfaces with the | |||||
|
| according to the following pin assignments: |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| DX8100 |
| |
|
|
|
|
|
|
|
|
|
|
|
| Pin 3: TD |
| Pin 2: RD |
|
|
|
|
|
|
|
|
|
|
|
|
| Pin 7: RTS |
| Pin 5: SGND |
|
|
|
|
|
|
| ||
|
|
| |||||
| DB9 (male) | DB9 male connector that connects the | |||||
|
| • | Pin 2: RD |
|
|
| |
|
| • | Pin 5: SGND |
|
|
| |
|
|
|
|
|
| ||
| Cable | The cable length is 3 feet (0.91 m). |
|
|
| ||
DB9 (female)
DB9 female connector that connects the ATM/POS device to the
79 |
