9.In the Device Configuration page, do the following:
a.Click the Settings tab. The Available ATM/POS Device table is displayed.
b.In the Device ID column, click the check box to select an ATM/POS device.
c.
d.Click in the Data Format cell to display the available data formats.
e.Select the data format you want to assign to the ATM/POS device.
f.Do one of the following:
•Click Apply to confirm selection and remain in the Device Configuration dialog box.
•Click OK to confirm selection and return to the Port/Device page.
Figure 113. Assigning a Data Format to An ATM/POS Device
10. Click 
. The Linking setup page is displayed.
87 |
