SETTING UP A RS-232 ATM/POS DEVICE CONFIGURATION
This section describes how to set up a RS-232 ATM/POS device configuration. You use the RS-232 ATM/POS device configuration to record searchable ATM/POS data that is synchronized with recorded video. In this configuration, the camera is connected directly to the DX8100 camera input. The ATM/POS data is routed through the VSI-PRO to the DX8100 RS-232 communications port. ATM/POS output is recorded by the DX8100 as data. Once recorded, the ATM/POS data is searchable and can be displayed synchronously with the recorded transaction video.
Figure 104 illustrates a RS-232 ATM/POS device configuration. One or two ATM/POS devices can be connected to the DX8100. One camera is shown, but multiple cameras can be assigned to monitor the ATM/POS event from different physical positions. For specific details about the DX8100 back panel, refer to Figure 11 on page 23.
Figure 103. RS-232 ATM/POS Device Configuration
The table below describes the items required for the RS-232 ATM/POS device configuration.
| | Table J. Items Required for a Single RS-232 ATM/POS Device Configuration |
| | |
Item | Part | Description |
| | |
| Camera | The designated camera positioned to monitor the ATM/POS event. One or more cameras can be configured |
| | to respond to an ATM/POS event. |
| Video cable | A user-supplied cable that connects the camera to the DX8100 video input. |
| | |
| VSI-PRO | AVE VSI-PRO ATM/POS interface. |
| | |
| Data cable | AVE triport cable used to connect the ATM/POS device to the VSI-PRO and to connect the VSI-PRO to the |
| | DX8100 RS-232 COM1 or COM2 port. |
| | |
| DX8100 server | The DX8100 DVR. |
Figure 105 illustrates a dual ATM/POS device configuration.
| | | | | | | | | | |
| | | | | | | | |
| | | | |
| |
| | | | | |
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | Figure 104. RS-422 ATM/POS Device Configuration | | |
