RELAY OUTPUT INSTALLATION
The DX8100 has either 8 or 16 relay outputs, depending on your system’s configuration. Each output is programmed to function as either a normally open or normally closed circuit. A signal from a relay output will operate the device connected to the output. The maximum relay power rating is 120 VAC, 0.5 A; 24 VDC, 1 A.
To wire a relay output:
1.Insert the blue terminal blocks into the relay sockets on the back panel of the recorder.
2.Connect one wire from the device to one of the relay output terminals 1 through 16.
Relay outputs do not have to correspond numerically to alarm inputs. All sensor input and relay output actions can be linked through programming.
3.Connect a second wire from the relay device to a GND terminal.
4.Refer to the DX8100 Operation/Programming manual for information on how to program relay outputs.
| IN1 |
|
| IN2 |
|
| IN3 |
|
| IN4 |
|
|
| IN5 |
| IN6 | IN7 | IN8 | |
OUT1 |
|
| OUT2 |
|
| OUT3 |
|
| OUT4 |
|
| OUT5 |
| OUT6 | OUT7 | OUT8 | |||
ALARM INPUTS |
|
|
|
| RELAY OUTPUTS |
|
|
|
|
|
| ||||||||
1 | 2 | 2 | 4 | 5 | 6 | 7 | 8 | GND | 1 | 2 | 2 | 4 | 5 | 6 | 7 | 8 | GND |
|
|
9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RELAY |
|
|
|
|
|
|
|
|
|
|
| GND |
| ||
|
| OUTPUT 1 |
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 15. Relay Terminal Installation
25 |