Laser has reached end of life | Pelco FR82011 instruction

Table B. Troubleshooting with Front-Panel Indicators (Continued)

Indicator
Color	Meaning	Possible Cause		Corrective Action

		Optic Fault LED (	) (Continued)

Flashing red

Ethernet link is down.

NOTE: In addition to a flashing red Optic Fault LED, the 100BASE-FX LED is red and the left RJ-45 Port Status LED (Link/Activity) LED is not lit.

Laser has shut down due to either of the following fault conditions:

•Module is operating in extreme environmental conditions; for example, operating temperature is below or above recommended range as stated in the Specifications section.

•Laser has reached end of life.

Ensure that module oper- ates according to operat- ing conditions stated in the Specifications section, and then cycle the power.

If problem persists, contact Product Support.

C2653M (6/07)

21

Image 21

Pelco FR82011 manual Meaning Possible Cause Corrective Action Optic Fault LED, Laser has reached end of life

Contents

FT82011/FR82011 Ethernet Media Converter Page Contents List of IllustrationsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Radio and Television Interference Regulatory Notices Description Product Overview C2653M 6/07 Multimode Models ModelsSingle-Mode Models*† RK5000PS-5U rack mount chassis Front Panel Rear Panel 10BASE-T/100BASE-TX Ports 1-4, RJ-45 connectors Package Contents Installation 10BASE-T/100BASE-TX Modes of Operation Flow control default setting Mounting the FT82011/FR82011 Module Into a Rack Mounting Mounting the FT82011/FR82011 Module Using the Wall Clip Connections Fiber connection Troubleshooting Color Meaning Optic Fault LED Receive optical signal Any of the following fault conditions If the cable isCheck for problems Budget specification stated Laser has reached end of life Meaning Possible Cause Corrective Action Optic Fault LED Lished Is not desired, refer to the Setting Table C. Troubleshooting with Rear-Panel IndicatorsAmber Amber Is occurring Not lit Meaning Possible Cause Full-duplex Desired, no action is required. IfMode Occur on a half-duplex link Required Half-duplex Color Meaning Possible Cause Corrective Action Mode Not desired, refer to the SettingDesired, no action is required Or if it is not the proper cable Not lit Specifications Quality of ServiceWeighted fair queuing scheduling Receiver Model Number Wavelength Optical Maximum Transmit/ReceiveEnd Multimode 62.5/125 μm Not used Appendix. RJ-45 Connector Pinouts C2653M 6/07 Product Warranty and Return Information ISO9001