Pelco FR82011 manual Table C. Troubleshooting with Rear-Panel Indicators, Amber Is occurring

Table C. Troubleshooting with Rear-Panel Indicators

Indicator
Color	Meaning	Possible Cause	Corrective Action
	RJ-45 10BASE-T/100BASE-TX Port Status LED - Left (Link/Activity)
Amber	A 10BASE-T	—	If 10BASE-T operation is desired, no
	link is estab-		action is required. If 10BASE-T operation
	lished.		is not desired, refer to the Setting
			10BASE-T/100BASE-TX Port Modes of
			Operation section in this manual for
			information.
Flashing	Data activity	—	If 10BASE-T operation is desired, no
amber	is occurring		action is required. If 10BASE-T operation
	on the		is not desired, refer to the Setting
	10BASE-T		10BASE-T/100BASE-TX Port Modes of
	link—data is		Operation section in this manual for
	being trans-		information.
	mitted or
	received.
Green	A 100BASE-	—	If 100BASE-TX operation is desired, no
	TX link is		action is required. If 100BASE-TX
	established.		operation is not desired, refer to the
			Setting 10BASE-T/100BASE-TX Port
			Modes of Operation section in this
			manual for information.
Flashing	Data activity	—	If 100BASE-TX operation is desired, no
green	is occurring		action is required. If 100BASE-TX
	on the		operation is not desired, refer to the
	100BASE-TX		Setting 10BASE-T/100BASE-TX Port
	link—data is		Modes of Operation section in this
	being trans-		manual for information.
	mitted or
	received.
			(Continued on next page)

22 C2653M (6/07)