Pelco FX82012 manual Troubleshooting, Module Reseat module or power Supply as necessary

Troubleshooting

LED indicators on the front and rear panels of the FX82012 module allow you to monitor operational status:

•LED indicators on the front panel allow you to monitor operating power, fiber redundancy mode status, 100BASE-FX port status, and optic signal/laser status. Refer to Table C for information about the front-panel indicators and associated troubleshooting guidelines.

•LED indicators on the rear panel allow you to monitor RJ-45 10BASE-T/100BASE-TX port status. Refer to Table D for information about the rear-panel indicators and associated troubleshooting guidelines.

Table C. Troubleshooting with Front-Panel Indicators

Indicator Color	Meaning	Possible Cause	Corrective Action
	Power LED (Pelco badge)
Blue	Power is being	—	No action required.
	applied to the
	module.
Not lit	Power is not being	Power connection is faulty.	Check power connection.
	applied to the		If module is rack mounted,
	module.		reseat module or power
			supply as necessary.
		Power supply has failed.	Replace power supply.
		Loss of power occurs due to	Check circuit breakers, fuses,
		tripped circuit breakers,	or electrical service as
		blown fuses, or faulty	necessary.
		electrical service.
			(Continued on next page)

22 C2624M (6/07)