Pelco manual Mounting the NET5308T-EXP into the Rack

RACK FRONT RACK REAR

(2) SCREWS,	(2) SCREWS,
	10-32 X 0.5-INCH
10-32 X 0.5-INCH
	PHILLIPS PAN HEAD
PHILLIPS FLAT HEAD

FRONT-MOUNT RAIL REAR-MOUNT RAIL

Figure 9. Attaching Support Rails

6.Repeat step 5 for the second support rail assembly.

7.Tighten the 8-32 x 0.375-inch Phillips truss head screws that were attached to the front- and rear-mount rails in steps 2 and 3.

8.Place the unit onto the mount rails by sliding the chassis brackets onto the rails. The unit should slide in and out of the rack easily.

WARNING: When sliding out the NET5308T-EXP, be careful not to let the unit fall out of the rack.

Figure 10. Mounting the NET5308T-EXP into the Rack

14 C2655M-A (10/08)