Pentax 15921 Using the Power Saving Function, Use the four-way controller 23 to select Power

Using the Power Saving Function

You can save battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the display returns to the ordinary brightness if any button is pressed.

1
	Press the 3 button in Q mode.
2	The [W Setting] menu appears.
	Use the four-way controller (23) to select [Power
3	Saving].
	Press the four-way controller (5).
4	A pull-down menu appears.
	Use the four-way controller (23)	Setting	2/3
	to select the time until the camera	Video Out	2min.
	enters the power saving mode.	Brightness Level	1min.
		Power Saving	30sec.
	Choose from [2min.], [1min.], [30sec.],	Auto Power Off	15sec.
		Reset	5sec.
	[15sec.], [5sec.] or [Off].
		Delete All	Off
		MENU Cancel	OK OK
5
	Press the 4 button.
	The setting is saved.

• Power Saving does not function in the following situations: - In the playback mode

-While recording a movie

-While the camera is connected to a computer

-While a menu is being displayed

•When no operation is performed after the camera is turned on, the Power Saving function is activated only after 15 seconds elapse even if [5sec.] is set.

7 Settings

175