Pentax 15921 manual Changing the Start-up Screen, Q mode, press the four-way controller

The image selection screen appears.

Changing the Start-up Screen

You can choose the start-up screen displayed when the camera is turned on.

You can choose any of the following images as the start-up screen:

- The Guide Display Start-up Screen showing a guide for the shooting modes and buttons

- PENTAX logo

- One of your own images (compatible images only)

1
	In Q mode, press the four-way controller (3).
2	The Playback Mode Palette appears.
	Use the four-way controller	Start-up Screen	2/2
	(2345) to select R(Start-up
	Screen).
		For setting a captured
		image as the Start-up
		Screen
		MENU Cancel	OK OK

3 Press the 4 button.

4 Use the four-way controller (45)

7

to choose the image for the start- up screen.

100-0017

Only images available for the start-up
screen are displayed. You can also choose
the PENTAX logo screen or the Guide	MENU Cancel	OK OK
Display Start-up screen already stored in
the camera.

5 Press the 4 button.

The start-up screen is set.

• Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card is formatted.

•The start-up screen is not displayed when set to [Off].

•The start-up screen is not displayed when the camera starts up in the playback mode.

Settings

177