Pentax 15921 manual Taking Pictures Using the Remote Control Unit Optional

3 TakingPictures

3 Press the shutter release button halfway.

The focus frame on the display turns green when the camera focuses on the subject at the correct distance.

4 Press the shutter release button fully.

Pictures are taken continuously as long as you keep the shutter release button pressed.

• The flash does not discharge in j and qmodes.

• j and qcannot be selected in 9 (Green), S (Fireworks), N (Frame Composite), o(Miniature Filter) or p(HDR Filter) mode, or when recording a movie.

•Digital Zoom and Intelligent Zoom are not available in qmode.

•The focus, exposure and white balance are locked with the first shot.

• When [Face Detection] is set to [On] (p.69), it works only for the first shot.

•The Blink Detection function works only for the last shot.

•In b(Auto Picture) mode, pictures are taken consecutively in the shooting mode selected for the first shot.

Taking Pictures Using the Remote Control Unit (Optional)

You can use the optional remote control (p.208) to take pictures while you are away from the camera.

Stabilize the camera with a tripod or other support when taking a picture using the remote control unit.

		The self-timer lamp blinks quickly and the picture is taken
i	Remote Control	approximately three seconds after the shutter release
		button on the remote control unit is pressed.
h	0-sec Remote	The picture is taken immediately after the shutter release
	Control	button on the remote control unit is pressed.

1 Press the four-way controller (2) in A mode. The [Drive Mode] screen appears.

2 Use the four-way controller (45) to select i and press the four-way controller (3).

86