Pentax 15921 manual Switching the Face Detection Function, 100

4 Use the four-way controller (23) to change the sensitivity.

Rec. Mode	1/3
Recorded Pixels
White Balance	Auto
Focusing Area	64
AE Metering	100
Sensitivity	200
EV Compensation	400
MENU Cancel		OK OK

5

36

Taking Pictures

Press the 4 button.

The setting is saved.

Press the 3 button.

The camera returns to capture status.

•When the sensitivity is set to 3200 or 6400, the number of recorded pixels is fixed at f (2592×1944).

•In 9(Green) mode or when recording a movie, only [Auto] (sensitivity 64 - 800) is available.

•In c(Digital SR) mode, only [Auto] (sensitivity 64 - 6400) is available.

•In S (Fireworks) mode, the sensitivity is fixed at the minimum value.

•If you change the [Sensitivity] setting frequently, you can save time by assigning it to the Green button (p.107).

Saving the Sensitivity setting 1p.113

Switching the Face Detection Function

The S1 comes with a Face Detection function that spots the faces in your shot and automatically adjusts the focus and exposure for the faces. It will automatically release the shutter when people are smiling, or if anyone blinked, it will tell you that so you can take the shot again until it is perfect. The default setting is [On] for [Face Detection] and O (On) for [Blink Detection].

1 Press the 3 button in A mode. The [A Rec. Mode] menu appears.

2 Use the four-way controller (23) to select [Face

Detection].

100