Correcting Defective Pixels in the CCD Sensor (Pixel Mapping)

Pixel Mapping is a function for mapping out and correcting defective pixels in the CCD sensor. Run the Pixel Mapping function if image dots always seem to be defective in the same place.

1 Press the 3 button in A mode, and press the four- way controller (5).

The [W Setting] menu appears.

[Pixel Mapping] cannot be selected when the 3 button is pressed in Q mode.

2

3

Use the four-way controller (23) to select [Pixel Mapping].

Press the four-way controller (5).

Setting

3/3

 

The [Pixel Mapping] screen appears.

Pixel Mapping

 

 

 

 

 

Format

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU Exit

74

Settings

Use the four-way controller (23) to select [Pixel Mapping].

Pixel Mapping

Checks the image sensor

and corrects defective

pixels

Pixel Mapping

Cancel

OK OK

5

Press the 4 button.

Defective pixels are mapped and corrected.

When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Charge the battery or replace it with a fully charged battery.

178

Page 180
Image 180
Pentax 15921 manual Correcting Defective Pixels in the CCD Sensor Pixel Mapping, Pixel Mapping screen appears, 178