Pentax K20D manual 106, AF Adjustment

106

4 ShootingFunctions

AF Adjustment

You can adjust the AF focusing position with [35. AF Adjustment] in the [ACustom Setting] menu.

• Be sure to use AF Adjustment only when necessary. Care should be taken as adjusting the autofocus may make it difficult to capture images with the appropriate focus.

•Any camera shake during test shooting for focus adjustment may make it difficult to obtain the accurate focusing position. Therefore, always use a tripod when taking test shots.

1Select [35. AF Adjustment] in the [ACustom Setting] menu and press the four-way controller (5).

2Press the four-way controller (23) to select [On] and press the four-way controller (5).

The AF Adjustment screen appears.

3Use the four-way controller (23) to select [Apply All] or [Apply One].

Apply All	Applies the same adjustment value to all lenses.
Apply One	The lens ID is displayed when obtained. Saves and applies
	an adjustment value for each lens type. (Up to 20 lens types)

4 Press the four-way controller (5) and
	35. AF Adjustment
adjust the value with the rear e-dial or
the four-way controller (45).	Apply All		+5
Press the four-way controller (5)
	Apply One	Unset
(rear e-dial y) to adjust the focus to a
closer position and press the four-way
controller (4) (rear e-dial f) to adjust	Reset
the focus to a farther position.	MENU Cancel	OK Save

5Press the 4button.

6Press the 4button.

The camera returns to the Capture mode.

7Take a test picture.

You can check the focusing position by enlarging the image during Live View (p.114) or Digital Preview (p.115).

• Press the Green button in Step 4 to set the adjustment value to ±0.

•If an adjustment value has been saved using Apply One and you press the 4button with [Apply All] selected in Step 6, the Apply All value is used instead of the Apply One value.

•To reset a saved adjustment value, select [Reset] on the AF Adjustment screen in Step 3. (p.241)