Pentax K20D manual 164, White Balance fine-tuning screen, Appears when measuring is completed

10

11

9

Press the 4button.

The screen to select the measuring range

is displayed.

OK OK

7 Use the rear e-dial to select the entire screen or spot area for the measuring range.

8 When a spot area is selected, use the four-way controller (2345) to move the frame to the area you want to measure.

Slide the focus mode lever to \ the shutter cannot be released.

when

6 Press the shutter release button fully.

164

6 ShootingSettings

	Manual
The White Balance fine-tuning screen	White Balance
appears when measuring is completed.	SHUTTER		G
Tune using steps in “Fine-Tuning the		B			A
White Balance” if fine-tuning is
	±0	±0
necessary. (p.162)
			M
	MENU Cancel ±0			OK OK

Press the 4button.

The camera returns to the White Balance screen.

Press the 4button.

The camera is ready to take a picture with the set White Balance.

•No image is recorded when the shutter release button is pressed to adjust the white balance. Press the {button to save the background image as a JPEG image. The image save confirmation screen appears. Select [Save as] and press the 4button.

•[NG] appears when measuring is unsuccessful. Press the 4button while displayed to return to the White Balance fine tune screen for remeasuring.

•If the picture is extremely overexposed or underexposed, white balance may not be adjusted. In this case, adjust appropriate exposure and adjust the white balance.