Pentax K20D 101, EV Compensation for a Hyper-manual and M Flash X-sync speed

101

EV compensation is not available when the exposure mode is set to B (Green) or p (Bulb) mode.

•The EV compensation cannot be canceled by turning the camera off or by setting any other exposure mode.

•The EV compensation value is reset to 0 when the Green button is pressed while holding down the m button.

EV Compensation for a (Hyper-manual) and M (Flash X-sync speed)

For example, if the EV compensation value is set to +1.5 for a and M, an underexposure of 1.5EV is displayed on the EV bar. If you set the exposure value so that the V is displayed at the center of the EV bar, the image will be captured with the compensated value.

Changing the Exposure Steps

Set Exposure Steps in [2. EV Steps] in the [ACustom Setting] menu to increments of 1/2 EV or 1/3 EV.

2. EV Steps

1/2 EV Steps

1/3 EV Steps

Exposure setting steps are set to 1/2 EV

4 ShootingFunctions