Pentax K20D manual 118, Camera is ready to take pictures continuously

118

4 ShootingFunctions

4

5

6

7

Press the four-way controller (3) and use the four-way controller (45) to select g or h.

Press the 4button.

The camera is ready to take pictures continuously.

Press the shutter release button halfway.

The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.

Press the shutter release button fully.

Pictures are taken continuously while the shutter release button is fully pressed. Take your finger off the shutter release button to stop.

•If the focus mode is set to l (Single mode), focus is locked on the first focus position and pictures are taken at the set interval.

•Focusing is continuously active during continuous shooting when the focus mode is set to k (Continuous mode).

•The shutter cannot be released until charging is complete when using the built-in flash. You can set the camera to enable shutter release before the built-in flash is ready in the [ACustom Setting] menu. (p.137)

•You can also use the remote control for continuous shooting. (p.125)

•Select a setting other than ghin the Drive Mode options screen to cancel continuous shooting. The setting is canceled when the camera is turned off if [Drive Mode] in [Memory] of the [A Rec. Mode] menu (p.236) is set to P (Off).