Pentax K20D manual 119, Burst Shooting

Burst Shooting

You can take pictures continuously at approximately 21 frames per second. In this mode, images are saved with JPEG Quality set to Y(1536×1024) regardless of the save format setting (p.156). The JPEG Quality set in the [A Rec. Mode] menu is used.

1 Press the {button.

The Fn menu appears.

2 Press the four-way controller (2) and use the four-way controller (45) to select j.

Drive Mode

Burst Shooting

OK OK

3 Press the 4button.

The camera is ready to take pictures continuously.

4 Press the shutter release button halfway.

The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.

5 Press the shutter release button fully.

Pictures are taken continuously while the shutter release button is fully pressed until the camera buffer memory is full (JPEG Quality C: maximum of approximately 115 pictures). The focus is locked during shooting.

• The mirror raises during shooting and Instant Review is displayed continuously on the monitor.

•The flash is turned off and the button operation is unavailable in this mode.

•Multi-exposure and Auto Bracket are disabled in this mode.

•Select a setting other than jin the Drive Mode options screen to cancel burst shooting. The setting is canceled when the camera is turned off if [Drive Mode] in [Memory] of [A Rec. Mode] menu (p.236) is set to P (Off).

119

4 ShootingFunctions