Pentax K20D manual Printing Images Using the Dpof Settings, Disconnecting the USB Cable, 213

Printing Images Using the DPOF Settings

1 Use the four-way controller (23) to select [DPOF

AUTOPRINT] on the PictBridge menu.

2 Press the 4button.

			100-0046
	The Print w/DPOF settings screen	Print w/DPOF settings
	appears.
	Use the four-way controller (45) to	Copies	1 Date
	check the number of copies for each
		Total	10
	image, whether the date is imprinted or	MENU	OK Print
	not, and total number of copies. The
	number of copies and the date setting are
	set with the Print Service. (p.204)
3
	Press the 4button.

The print settings confirmation screen appears.

Refer to Steps 7 to 11 of “Printing Single Images” (p.211) for details on how to change the settings.

4 Press the 4button on the print settings confirmation screen.

The images are printed according to the settings.

Press the 3button to cancel printing.

Disconnecting the USB Cable

Disconnect the USB cable from the camera and printer when you have finished printing.

1 Turn off the camera.

213

9

Printing from the Camera

2 Disconnect the USB cable from the camera and printer.