In the [White Balance] screen, use the four-way controller (23) to select K(Manual).

Manual Setting

Have a blank sheet of white paper or similar material ready.

1

2 Point the camera at the blank sheet of paper or other material so that it fills the frame displayed in the center of the screen.

White Balance

D

SHUTTER Adjust

MENU Cancel

OK OK

3 Taking

3 Press the shutter release button fully. The white balance is automatically adjusted.

4 Press the 4button.

The setting is saved and the screen returns to the [ARec. Mode] menu.

5 Press the 3button.

The camera returns to capture status.

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.

AUTO The sensitivity is automatically adjusted by the camera. (Sensitivity 50 - 800)

50

 

The lower the sensitivity, the less noise that affects the image. The

100

 

shutter speed will be slower in low light conditions.

200

 

 

400

 

 

800

 

 

1600

 

Higher sensitivity settings use faster shutter speeds in low light

3200

 

conditions to reduce camera shake, but the image may be affected by

 

 

noise.

6400

When the [Bright Area Adj.] is set to on, the sensitivity cannot be set to 50.

Pictures

125