3 TakingPictures

In a(Manual) mode, EV compensation is unavailable.

A warning appears if there is a large difference between the current exposure and the proper exposure. If the exposure is greater than ±2.0EV, only the exposure warning icon is displayed. If the exposure is lower than ±2.0EV, the exposure warning icon is displayed and the difference between the current exposure and the proper exposure is shown in increments of 1/3EV.

[AUTO] cannot be selected for sensitivity.

,, c, b, and d are unavailable.

The shutter speed and aperture set for this mode are shared with b and cmodes. Changes to this value in one mode are reflected in the others.

Noise Reduction is used with shutter speeds slower than 1/4 seconds.

Whenever the shutter speed or aperture is changed, the new value is shown in a larger font size than normal (height of 1.5x).

Even when the zoom ratio is changed, the aperture is maintained. However, when the current aperture cannot be used with the selected zoom ratio, the closest aperture is set. Even in this case, if you change the zoom ratio again and the original aperture can be used, the setting is returned to the original aperture.

Using the A(USER) Mode

You can take pictures with the settings saved in [Save as USER] on [W Setting] menu (p.199).

Save the settings for the e, b, c, and amodes in advance for later use.

In USER mode, you can change the settings saved during shooting.

1 Set the mode dial to A.

This recalls the saved settings.

76