1 GettingStarted
Turning the Camera On and Off
Power switch
1 Remove the lens cap.
2 Press the power switch.
The camera turns on and the display turns on.
When you turn the camera on, the lens will extend. (The lens will not extend if the default settings have not been configured.)
If the [Language/
] screen or [Date Adjust] screen appears when you turn the camera on, follow the procedure on p.40 to set the display language and/or current date and time.
*When the camera is turned on, the screen flickers. This is not a malfunction.
3 Press the power switch again.
The display turns off, the lens is retracted, and the camera turns off.
Checking the Memory Card
The memory card is checked when the camera turns on and the memory status is displayed.
aThe SD Memory Card is inserted. Images and sound files will be saved on the SD Memory Card.
+The SD Memory Card is not inserted. Images and sound files will be saved in the
The
rCard is in the LOCK position (p.36). Images and sounds cannot be recorded.
38
Memory status
38
04/02/2009
14:25