3 TakingPictures

1 Set the mode dial to c.

2 Turn the e-dial to change the aperture value.

3 When using the flash, press the b button. The flash pops up. (p.112)

4 Take a picture.

The shutter speed and sensitivity (only when sensitivity is set to [AUTO]) are automatically set in combination with the aperture being used to achieve proper exposure. If the proper exposure cannot be achieved, the closest value is set and the shutter speed is displayed in red.

,and c are unavailable.

The aperture set in this mode is shared with manual mode. Changes to this value in one mode are reflected in the other.

Noise Reduction is used with shutter speeds slower than 1/4 seconds.

In cmode, the aperture is displayed in a larger font size than normal (height of 1.5x). When using EV compensation, the EV compensation value is displayed using a larger font.

Even when the zoom ratio is changed, the aperture is maintained. However, when the current aperture cannot be used with the selected zoom ratio, the closest aperture is set. Even in this case, if you change the zoom ratio again and the original aperture can be used, the setting is returned to the original aperture.

74