10 Press the 4button.

The edited image is saved with the recorded pixels of h (2048×1536).

Optional Frames

The optional frames are stored in the built-in memory in the X70. These optional frames are deleted if the files on the built-in memory are deleted with a computer or the built-in memory is formatted. To reload the optional frames into the builtin memory, copy the files from the CD-ROM (S-SW87) supplied with the camera.

To Copy Frames

1 Remove the SD Memory Card from the camera.

If you leave the SD Memory Card in the camera, the frames will be copied onto the card, not into the camera's built-in memory.

2 Connect the camera to the computer using the provided USB cable (I-USB7).

Refer to “Connecting to a Computer” (p.217) for instructions on connecting the camera to a computer.

3 When the device detection window opens, click [Cancel].

4 Insert the CD-ROM (S-SW87) into the CD-ROM drive. 5 When the installer window opens, click [EXIT].

6 If there is not already a “FRAME” folder in the root directory of the camera (removable disk), create the folder.

7 Copy the desired files from the FRAME folder in the root directory of the CD-ROM to the FRAME folder on the camera (removable disk).

For information on working with files on your computer, refer to the instruction manual supplied with the computer.

8 Disconnect the USB cable from the computer and camera.

Refer to “Connecting to a Computer” (p.217) for instructions on disconnecting the cable.

•Frames can be stored both in the built-in memory and on the SD Memory Cards, but using large numbers of frames may slow down processing times.

5 Editingand

Images Printing

185