It is recommended to use the optional AC adapter kit K-AC64 when the camera is connected to the computer (p.33). If the battery runs out of power while images are being transmitted to the computer, the image data may be lost or damaged.

Transferring Images

Transfer the images captured with the camera to your Macintosh.

If there is no SD Memory Card in the camera, the images stored in the built-in memory will be transferred to your Macintosh.

5 Specify a save location, make sure that [Launch ACDSee] is checked, and click [Download].

After images are copied to your Macintosh, the “ACDSee 2 for Mac” starts.

When [Delete images from device] is checked, images are deleted from the camera after transfer is complete.

Disconnecting the Camera from Your Macintosh

1 Drag [NO_NAME] on the desktop to the trash.

If the SD Memory Card has a volume label, drag the icon of that name to the trash.

2 Disconnect the USB cable from your Macintosh and the camera.

• If the camera (removable disk) is being used by an application such as “ACDSee 2 for Mac”, the camera cannot be disconnected until the application is closed.

•The camera will automatically switch to the Playback Mode when the USB cable is disconnected from your Macintosh or the camera.

8 Connectingto

Computer a

235