To reduce the risk of hazards, use only CSA/UL Certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.

Care to be Taken During Handling

When traveling, take the Worldwide Service Network listing that is included in the package. This will be useful if you experience problems abroad.

When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or during traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD Memory Card), etc.

The lens on this camera is not interchangeable. The lens is not removable.

Do not clean the product with organic solvents such as thinner, alcohol or benzene.

Places of high temperature and humidity should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside.

This camera is not waterproof. Do not use this camera where it might come in contact with rain, water, or any other liquid.

Storing the camera where pesticides and chemicals are handled should be avoided. Remove the camera from its case and store in a well-ventilated place to prevent the camera from becoming moldy during storage.

Ensure that the camera is not subjected to substantial vibrations, shocks or pressure as this may cause damage or malfunction. Place the camera on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, ship, etc. If the camera is subjected to substantial vibrations, shocks or pressure, take your camera to your nearest PENTAX Service Center and have it checked.

The temperature range in which the camera can be used is 0°C to 40°C (32°F to 104°F).

The liquid crystal display will become black at a high temperature but will return to normal when normal temperatures are returned to.

5